Cover up and protect those unsightly swirls on your B-pillars with our B-Guard Protection Film Kit. Our protection film is durable and will retain its gloss and slickness while looking OEM for many years. This is a must-have for new and old car owners who close their doors using the B-Pillars (we all know someone!)

This kit contains:
1 Squeegee
1 Installation Solution
1 Sprayer Head
1 Microfibre Towel

You will need:
Carwash, Clay bar, Clay Lubricant, and Hairdryer

Installation instructions:

1. Wash the vehicle to avoid cross-contamination during installation.

2. Move the vehicle to a garage or draft-free area to avoid airborne contaminants

3. Clay the B-Pillar to remove and stubborn contaminates on the B-Pillar

4. Spray Installation Solution on the B-Pillar and squeegee it away (downwards) to remove any dust prior to installation

5. Select the corresponding B-Pillar film and spray the Installation Solution to the adhesive side of the film whilst peeling it from the backing sheet

6. Spray some Installation Solution onto the B-Pillar then apply the film and align

7. Use the included squeegee to squeegee the solution out of the film to tack down once aligned

8. Repeat steps 4-7 for remaining B-Pillars

9. Once all complete, you can use a hairdryer to heat up the edges whilst running your ringer along of the film to avoid any major film lifting issues.

DIY B-Pillar Kits

B-Guard B-Pillar Protection Kit - VW Golf 7/7.5

keep your B-pillars looking new

Talk about your brand

Talk about your brand